Panasonic Viera TC-20LE50 Operating Instructions Manual

Panasonic Viera TC-20LE50 Operating Instructions Manual Manual pdf 21 page image

21AUDIO ADJUST12Press to select AUDIO ADJUST.Press to display the AUDIO ADJUST screen.Press to select the sub-menu.Select the setting listening to the sound.Press to activate the setting if necessary.MODENotes:• Red display : With signalWhite display : No signalWhite display (All modes) : MONO• To change the mode using SAP button(see page 12).STEREO/SAP/MONOBASS, TREBLEYou can change the level of each sub-menu(BASS and TREBLE) for each MODE (AUTO,STANDARD, DYNAMIC and MUSIC)according to your personal preference.NORMAL/NORMALIZESelect “NORMALIZE” and press “OK” button to return each MODE to the factory default setting.Notes:• “NORMAL” means the MODE is at the factory default setting. “NORMAL” changes to “NORMALIZE” when you changethe setting of BASS or TREBLE.• You can normalize each MODE separately.MENUADJUSTPICTUREAUDIOSET UPPICTURE ADJUSTAUDIO ADJUSTAUDIO ADJUSTNORMALMODEBASSTREBLESTEREO SAP MONO+ 5+ 3AUTOPress the MENU button to display the MENU screen and select ADJUST.MODEAUTOSTANDARDDYNAMICMUSICFunctionAutomatically adjusts for a wide Dynamic Range.Emits the original sound.Gives contrast to sound.For programs consisting mainly of music. Enhances high sounds (around 4 kHz).Sub-menuBASSTREBLEFunctionAdjusts low frequencies.Adjusts high frequencies.MODESTEREOSAPMONOFunctionTwo channel audio reception.Second Audio Programming(typically used for bilingual audio).Select when stereo signal is weak.