Panasonic Viera ST50A series Operating Instructions Manual

Contents

Panasonic Viera ST50A series Operating Instructions Manual Manual pdf 80 page image

Using Network Services (DLNA / VIERA Connect)806 Select [Connection Test] and access to testConnection Test AccessselectaccessPerforms automatic testing of the network connection for the TV. (It takes awhile to test.)Check wireless network connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test : succeededThe test is successful and the TV is connected to the network.: failedCheck the settings and connections. And then try again.If you continue to have difficulty, please contact your internet service provider.■ [WPS(PIN)]Enter the PIN code to the access point, and then select [Connect]Please register the following PIN codes on thewireless access point.PIN code : 12345678Select ‘Connect’ after entering and saving thesettings on the wireless access point.WPS(PIN)Connect■ [Manual]You can setup SSID, security type, encryption type, and encryption key manually.Follow the on-screen instructions and set manually.● When you use 11n (5 GHz) for the wireless system between the built-in wireless LAN and access point, select [AES]for the encryption type.Please input the network name(SSID).Network Name(SSID) SettingNetwork Name(SSID) XXXXXXXSecurity Type SettingsConnection will be made with the following settings:-Network Name(SSID) : XXXXXXXPlease select the security type.WPA2-PSKWPA-PSKShared keyOpenUpdate TV’s softwareAccesses the specific website to update TV’s software and search if any software updates are available.Select [Software Update]Connection TestNetwork ConnectionWireless Network SettingsIP/DNS SettingsNetwork Link SettingsSoftware UpdateNew Software MessageWiredAccessNetwork StatusOnselectaccess● Follow the on-screen instructions.