Panasonic VL-VN1500 Installation And Operating Instructions Manual

Contents

Panasonic VL-VN1500 Installation And Operating Instructions Manual Manual pdf 3 page image

System overviewThis document explains basic information requiredto install and configure a VL-VN1500 Door Stationfor use with a Video Intercom System that iscomprised of the following devices.R VL-MN1000 Room MonitorR VL-VN1900 Lobby StationR VL-VN1500 Door StationR VL-VN1700 Control BoxMain featuresCamera featuresR When a visitor calls you, you can view theimage from the door station camera on yourroom monitor, and confirm who the visitor isbefore talking or opening the door.Other featuresR The built-in card reader can be used to open adoor connected to an electric lock (usersupplied).Included itemsThe following items are included in addition to thedoor station.Item QuantityMounting base 1Screw (3 mm ´ 5 mm)Used to secure the door station tothe mounting base.1Screw (3.8 mm ´ 20 mm)Used to secure the mounting baseto the wall.4Item Quantity2-pin terminal blockUsed to connect wires to the R1/R2connection terminals.1DC plugUsed to connect the power supplyunit to the door station.1Optional itemsThe following items are sold separately. Pleasecontact your nearest Panasonic dealer for salesinformation.Compatible accessories (as of March, 2017)Item Model no.Power Supply Unit*1Power supply unit that can beused to power the door stationwhen no PoE power supply isavailable.VL-PS240Relay BoxUsed to connect an electric lock(user supplied) to the doorstation.VL-RLY1*1 This product complies with the IEEE 802.3afPower-over-Ethernet (PoE) standard. If PoE isavailable on your network, this product canreceive the necessary power from the networkthrough the Ethernet cable and no powersupply unit is needed. If PoE is not available,you will need to connect a power supply unit tothe product.Compatible system devices (as of March, 2017)Item Model no.Room MonitorIP-compatible room monitor withtouch screen. Typically installedinside a residence.VL-MN10003Introduction