5.1 Recording doorphone imagesThe main monitor and extension monitor can recorddoorphone images (still images). They can save imagesfrom up to 50 doorphone calls or monitoring sessions.Each time new images are recorded, they are saved inan image set of up to 4 images.5.1.1 Recording automatically (recording areceived call)When a visitor calls you, the main monitor and extensionmonitor record 4 images automatically (whether youanswer the call or not). Recording starts about 2 secondsafter you receive the call.When you do not answer a callThe recorded images are saved as unplayed images,and the play lamp lights.When there are multiple doorphonesR When you are talking or monitoring and there is anincoming call from another doorphone, images fromthe incoming call will not be displayed and recorded.In order to display and record incoming calls, youmust end the current call or stop monitoring.R If there is an incoming call from another doorphonewhile receiving an incoming call, the number ofrecorded images from the 1st caller (4 images) arereduced.When the memory is full (auto image updating)When the memory is full, new images overwrite theoldest images automatically. This occurs even if theoldest images are unplayed images.5.1.2 Recording manually (recording whilemonitoring)The main monitor and extension monitor can manuallyrecord images while monitoring.While monitoring, press . Up to 4 images will berecorded.– is displayed on the screen when recording.5.2 Playing recorded imagesWhen there are new (i.e., unplayed) images recorded,the play lamp (page 9) lights.Note:R Images manually recorded by the main monitor andextension monitor can only be played by the devicethat recorded the images.1 Press M N.R “Recorded image list” screen is displayed.2 Select “Unplayed images” (for new images) or“Played images” (for images that have beenplayed) ® .R The most recent image set of the selected type isdisplayed.3 Browse the image sets and images.R The following operations are available whenbrowsing images.R See page 15 for a list of all available operations.Plays back all images in animage set continuouslyBrowses image sets, from olderones to newer onesBrowses image sets, fromnewer ones to older onesDisplays the options menuReturns to the previous screen4 When finished, press M N.Note:R The play lamp turns off when the unplayed image isdisplayed.5.2.1 Image playing screenImage playing screen[4] 22 December 2019 9:1811ACBDEDevice numberImage position within a image setImage set numberRecording date and timeIndicates that the image has not been played.Status icons1Indicates the number of the doorphone thatrecorded the image.Indicates that the image is protected (i.e.,cannot be deleted)Available soft keysPlays back all images in an image setcontinuously155. . Recording and playing5. Recording and playing