Panasonic VL-SV74 Operating Instructions Manual

Also see for VL-MV74: Installation guide Operating instructions Important information and quick guide

Panasonic VL-SV74 Operating Instructions Manual Manual pdf 12 page image

Wide mode(default setting) Zoom modeImages are not zoomed.The full camera image isdisplayed.Images are zoomed.Images are displayed 2times larger than widedisplay.Note:R The zoom feature uses a digital zoom. As a result,the image quality of zoomed images is lower thanwide display images.R You can switch between wide and zoom modes andadjust the zoom position while monitoring or on a call.See page 19.Selecting wide or zoom1. Press M N ® select “Initial settings” ®.2. Select “Wide/Zoom settings” ® .R If there are multiple doorphones, select thedoorphone to be configured ® .3. Select the desired setting ® .– “When visitors come”: Your settings will beused when you answer calls from visitors.– “When monitoring”: Your settings will be usedwhen you are monitoring.4. Select the desired display mode ® .R A beep sounds and the settings are changed.5. When finished, press M N.Note:R If you select “Zoom”, adjust the zoom position so thatpeople or objects that you want to view are displayedcentrally in the screen.R When images are recorded in zoom mode, only thezoomed area is recorded.Selecting the zoom position (pan/tilt position)You can select which area of the image is displayedwhen displaying zoomed images.1. Press M N ® select “Initial settings” ®.2. Select “Zoom position settings” ® .R If there are multiple doorphones, select thedoorphone to be configured ® .R A zoomed image from the doorphone isdisplayed.3. Select the desired zoom position ® .R A beep sounds, the settings are changed, and thedisplay turns off.4. When finished, press M N.Note:R If you do not perform any operations for 90 secondswhile changing this setting, the setting is cancelledand the screen turns off.123. Preparation