Panasonic VL-GC003A Installation And Operation Manual

Contents

Panasonic VL-GC003A Installation And Operation Manual Manual pdf 4 page image

4Important InformationAdditional safety information1. Use only the power source marked on the unit. If you are not sure of the type of powersupplied to your home, consult your dealer or local power company.2. Use only the specified AC adaptor.3. Do not tamper with the plug.4. Make sure the plug is securely inserted.5. Do not touch the plug with wet hands.6. Do not place objects on the power cord. Install the unit where no one can step or trip onthe cord.7. To reduce the risk of electric shock, do not disassemble this unit. Take the unit to anauthorized service center when service is required. Opening or removing covers mayexpose you to dangerous voltages or other risks. Incorrect reassembly can cause electricshock when the unit is subsequently used.8. Unplug the monitor station from power outlets and refer servicing to an authorized servicecenter when the following conditions occur:A. If smoke rises, or an unaccustomed noise or smell is discharged from the unit.B. If metal objects have been dropped inside the monitor station.9. Do not put your ear(s) near the speaker, as loud sounds emitted from the speaker maycause hearing impairment.10. Only a qualified technician is allowed to connect a power cable to the unit.Contact an authorized service center.11. Do not make any wiring connections when the power supply is turned on.12. Never install wiring during a lightning storm.13. When existing chime wires are used, it is possible that they contain AC voltage. Electricshock or unit damage could result. Contact an authorized service center.14. Be sure to install the unit as specified to endure the mass.15. If the wiring is outdoors, use a protection tube or a surge protector.16. If the wiring is underground, do not make any connections underground.17. WARNING – Unplug the monitor station from power outlets if it emits smoke, an abnormalsmell or makes unusual noise. These conditions can cause fire or electric shock. Confirmthat smoke has stopped and contact an authorized service center.For best performanceL If a power failure occurs, the unit will not function.