Panasonic VL-CM851BX Operating Instructions Manual

Also see for VL-DM200BX: Operating instructions

Panasonic VL-CM851BX Operating Instructions Manual Manual pdf 14 page image

R When the Wireless Camera is (Out of range), the remaining battery power symbol of the WirelessCamera is not displayed on the Wireless Monitor.Charging the Wireless MonitorCharge the Wireless Monitor before use1 Insert the battery pack.R Open the cover (A), insert the battery pack (B), and then close the battery cover (A).Battery coverAB2 Plug the connector into the relay box firmly (C), and then plug the AC adaptor into a power outlet(100-240 V AC, 50/60 Hz) (D).PinCharge contacts(metal parts)Charge indicatorAC adaptorFEDRelay boxC3 Place the Wireless Monitor on the lower part of the Base Unit (E), and then firmly push it into theBase Unit until it clicks into place (F). Check that the charge indicator lights up.R While charging: the charge indicator lights up.When charging is completed: the charge indicator turns off.(It takes about 6 hours to complete charging.)R The Wireless Monitor can be left on the Base Unit without causing it to overcharge.R When the battery pack is completely out of power, it may take some time until the charge indicatorlights up (about 5 minutes) when charging the Wireless Monitor. This is not a malfunction.R When removing the Wireless Monitor from the Base Unit, remove the upper part of the WirelessMonitor first.Do not unplug the AC adaptor from the power outlet when recharging is completed. (Imagesfrom the Wireless Camera cannot be monitored when the AC adaptor is unplugged from thepower outlet.)14Getting Started