Panasonic VIERA TX-26LX70F Operating Instructions Manual

Also see for TX-26LX70F: Operating instructions Service manual

Contents

Panasonic VIERA TX-26LX70F Operating Instructions Manual Manual pdf 3 page image

4 5Safety PrecautionsIf you fi nd anyabnormality,remove the mains plugimmediately!Keep liquids away from the TVTo prevent damage which may result in fire orshock hazard, do not expose this appliance todripping or splashing.Do not place containers with water (flower vase,cups, cosmetics, etc.) above the TV. (including onshelves above, etc.)Do not remove coversNEVER modify the TV yourself(High-voltage components may cause seriouselectrical shock.)Have the TV checked, adjusted, or repaired at yourlocal Panasonic dealer.Do not place foreign objectsinside the TVDo not let metal or flammable objects drop into theTV through the air vents (fire or electrical shockmay result).( Cleaning an energized TV may causeelectrical shock.)When cleaning the TV, remove themains plugHandling the mains plug and leadInsert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)Ensure that the mains plug is easily accessible.Do not touch the mains plug with a wet hand. (This may cause electrical shock.)Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)Do not move the TV with the lead plugged in the socket outlet.Do not place a heavy object on the lead or place the lead near a high-temperature object.Do not twist the lead, bend it excessively, or stretch it.Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.Do not use a damaged mains plug or socket outlet.WarningDo not expose to direct sunlightand other sources of heatAvoid exposing the TV to direct sunlight and othersources of heat. To prevent fire never place anytype of candle or naked flame on top or near the TV.CautionBlocked ventilation by curtains,etc. may cause overheating, fireor electrical shock.Do not block the rear air ventsNotesMaintenanceDisplay panelCabinetMains plugRegular care: Gently wipe the surface clean of dirt by using a soft cloth.Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutraldetergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.Regular care: Wipe the surface clean using a soft dry cloth.Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)First, remove the mains plug from the socket outlet.Caution• The surface of the display panel has been specially treated and may be easily damaged.Do not tap or scratch the surface with your fingernail or other hard object.• Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances(this may degrade surface quality).Caution• Use care not to subject the TV's surfaces to detergent.(A liquid inside the TV could lead to product failure.)• Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances(this may deteriorate the surface by peeling the paint).• Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.When TV will not be used for along time, remove the mains plugThis TV will still consume some power evenin the Off mode, as long as the mains plug isstill connected to a live socket outlet.Use only the dedicated stands/ mounting equipmentUsing an unauthorized stand or other fixtures maymake the TV shaky, risking injury. Be sure to askyour local Panasonic dealer to perform setup.Use optional stands / mounts (p. 6).Do not place the TV on slopedor unstable surfacesThe TV may fall off or tip over.Electronic equipmentIn particular, do not place video equipment near theTV (electromagnetic interference may distort images/ sound).Equipment with an infrared sensorThis TV also emits infrared rays (this may affectoperation of other equipment).Keep the TV away from these equipmentAdjust the LCD panel to your desiredangle15° 15°(View from the top)If no signal is received and no operation isperformed in TV mode for 30 minutes, the TV willautomatically go to standby mode.Auto power standby functionTransport only in upright positionAC 220-240 V50 / 60 HzAllow suffi cient space around theTV for radiated heat101010 10(cm)TV StandMinimum distance