Panasonic VIERA TH-P42X30K Operating Instructions Manual

Also see for VIERA TH-P42X30K: Service manual

Contents

Panasonic VIERA TH-P42X30K Operating Instructions Manual Manual pdf 8 page image

Accessories / Options7Attaching the pedestalWarningDo not disassemble or modify the pedestal.• Otherwise the TV may fall over and become damaged, and personal injury may result.CautionDo not use any pedestal other than that provided with this TV.• Otherwise the TV or the display may fall over and become damaged, and personal injury may result.Do not use the pedestal if it becomes warped or physically damaged.• If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearestPanasonic dealer immediately.During set-up, make sure that all screws are securely tightened.• If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal willnot be strong enough to support the TV, and it might fall over and become damaged, and personalinjury may result.Ensure that the TV does not fall over.• If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over andpersonal injury may result.Two or more people are required to install and remove the TV.• If two or more people are not present, the TV may be dropped, and personal injury may result.Assemblyscrew (4)(silver)Assemblyscrew (4)(black)Pole Base• TBL5ZA3035 • TBL5ZX0050(TH-P42X30DTH-P42X30KTH-P42X30MTH-P42X30PTH-P42X30QTH-P42X30TTH-P42X30V) • TBL5ZX0052(TH-P50X30DTH-P50X30KTH-P50X30MTH-P50X30PTH-P50X30QTH-P50X30TTH-P50X30V)• M5 × 20 (mm) • M5 × 25 (mm)Assembling the pedestalUse the assembly screws tofasten the pole to thebase securely.• Make sure that the screws aresecurely tightened.• Forcing the assembly screws thewrong way will strip the threads.Securing the TVInsert the pole into the TV, and then fasten securely with theassembly screws .• Tighten the four assembly screws loosely at first, then tightenthem firmly to fix securely.• Carry out the work on a horizontal and level surface.AD CFrontDBHole forpedestalinstallation(View from the bottom)Arrow mark