Panasonic VIERA TC-P50XT50 Owner's Manual

Also see for VIERA TC-P42XT50: Service manual Manual de usuario

Contents

Panasonic VIERA TC-P50XT50 Owner's Manual Manual pdf 5 page image

5● In the unlikely event that you receive a shock from thisproduct, it is possible that your household outlet maybe wired improperly.Have an electrician verify that the TV’s outlet is properlywired. If the symptom persists, have the TV serviced by aqualified authorized technician.● To prevent the spread of fire, keep candlesor other open flames away from thisproduct at all times■AC Power Supply CordTo prevent fire or electric shock:● The Plasma TV is designed to operate on a 120 V AC,60 Hz service. Insert the power cord plug as far as it willgo into the wall socket.If the plug is not fully inserted, heat may generate, whichcould cause a fire.● The included power cord is for use with this unit only.● Do not use any power cord other than that providedwith this TV.● Do not handle the power cord plug with wet hands.● Do not do anything that might damage the powersupply cord.● When disconnecting the power supply cord, hold theplug, not the cord.● Do not use the power supply cord if the plug or cord isdamaged.Replace the cord or contact your Authorized Service Center.● Do not use a 3-prong to 2-prong AC plug adapters toconnect your TV’s plug to the wall outlet.Doing so will defeat the TV plug’s safety feature, whichcan lead to a shock hazard. If the wall outlet does notaccommodate a 3-prong plug, have a qualified electricianreplace your outlet and check the associated wiring.■Handling the power supply cord● Inse rt the power plug fully into the socket outlet. (If thepower plug is loose, it could generate heat and cause fire.)● Ensure that the power plug is easily accessible.● Ensure the earth pin on the power plug is securelyconnected to prevent electrical shock.• An apparatus with CLASS I construction shall beconnected to a power socket outlet with a protectiveearthing connection.● Do not touch the power plug with a wet hand. (This maycause electrical shock.)● Do not use any power cord other than that providedwith this TV. (This may cause fire or electrical shock.)● Do not damage the power cord. (A damaged cord maycause fire or electrical shock.)• Do not move the TV with the cord plugged in the socket outlet.• Do not place a heavy object on the cord or place the cordnear a high-temperature object.• Do not twist the cord, bend it excessively, or stretch it.• Do not pull on the cord. Hold onto the power plug bodywhen disconnecting cord.• Do not use a damaged power plug or socket outlet.● If a problem occurs (such as no picture or no sound),or if smoke or an abnormal odor is detected from thePlasma TV, unplug the power supply cord immediately.Continued use of the TV under these conditions mightcause a fire or permanent damage to the TV. Have the TVevaluated by an Authorized Service Center. Servicing of theTV by unauthorized personnel is strongly discouraged dueto its high voltage.● If water or an object gets inside the Plasma TV, if thePlasma TV is dropped, or if the enclosure becomesdamaged, unplug the power supply cord immediately.A short-circuit may occur, which could cause a fire. Contactan Authorized Service Center for an evaluation.■Radio waves● Do not place this TV in any medical institutions orlocations with medical devices.Radio waves from this TV may interfere with the medicaldevices and cause accidents due to the malfunction.● Do not use this TV near any automatic control devicessuch as automatic doors or fire alarms.Radio waves from this TV may interfere with the automaticcontrol devices and cause accidents due to the malfunction.● Keep this TV away at least 9 inches (22 cm) from thelocation where a cardiac pacemaker is implanted.Radio waves from this TV may interfere with the operationof the pacemaker.CAUTION● Do not cover the ventilation holes.Doing so may cause the Plasma TV to overheat, which cancause a fire or damage to the Plasma TV.● Leave a space of 3 15/16” (10 cm) or more at the top,left and right, and 2 3/4” (7 cm) or more at the rear.● When using the pedestal, keep the space between thebottom of the TV and the pedestal or stand surfaceclear from objects that may obstruct ventilation.■When Moving the Plasma TV● Be sure to disconnect all cables before moving thePlasma TV.Moving the TV with its cables attached might damage thecables which, in turn, can cause fire or electric shock.● To prevent an electric shock, disconnect the powerplug from the wall outlet as a safety precaution beforecarrying out any cleaning.● Transport only in upright position.Transporting the unit with its display panel facing upright ordownward may cause damage to the internal circuitry.● Using a dry cloth, clean any dust from the power supplycord and plug regularly.Build-up of dust on the power cord plug can increasehumidity, which might damage the insulation and cause afire.This Plasma TV radiates infrared rays;therefore, it may affect other infrared communicationequipment. Install your infrared sensor in a place away fromdirect or reflected light from your Plasma TV.The TV will still consume some power as long as thepower supply cord is connected to the wall outlet.● Display panel is made of glass. Do not apply strongforce or impact to the display panel.This may cause damage resulting in injury.● The TV is heavy. TV should be handled by 2 or morepeople. Support as shown to avoid injury by the TVtipping or falling.