Panasonic VIERA TC-P50XT50 Owner's Manual

Also see for VIERA TC-P42XT50: Service manual Manual de usuario

Contents

Panasonic VIERA TC-P50XT50 Owner's Manual Manual pdf 19 page image

19Basic Viewing 3D images on TVChange the view 3D⇔2D■Simply switches 3D ⇔ 2D images (Auto mode)● Switches to Manual mode (see below)3D format select3D2DselectOK(example)● VIERA TOOLS -->p. 17”3D” icon also available.■Change 3D format (Manual mode)During above operation press red button and switch to Manual mode.Display “3D format select (Manual) Press 3D to cycle through the 3D format3D format select (Manual)NativeFrame sequential (3D)Frame sequential (2D)Side by side (3D)Side by side (2D)Top and bottom (3D)Top and bottom (2D)2D -> 3DFrame sequential (3D)Frame sequential (2D)3D format select (Manual)NativeSide by side (3D)2D -> 3DSide by side (2D)(example)3D settings (Adjust 3D images)Select “3D settings” in “Setup”• How to Use Menu Functions (p. 38)■3D adjustmentChanges 3D depth by adjusting left-right parallax.Set “On” and adjusts “Effect”3D adjustment3D adjustmentEffectOn+1selectadjust3D adjustment (On/Off)Effect (-3 to +3)Select the item and setselectnext3D settings3D signal notification OnAuto detect 3D Auto 12D -> 3D depth MediumDiagonal line filterSafety precautionsLeft / Right swap Normal3D adjustmentOffSettings Item DescriptionAuto detect 3DAuto 1: Switches to 3D display when 3D indication is available (HDMI (3D), AVCHD file,etc)Auto 2: Same as Auto 1, plus it detects 3D signal by identifying similar image in side-by-side ortop-and-bottom 3D formats.Note: Choose 3D mode manually when auto detection is not available. (Off/Auto 1/Auto 2)3D signal notification On: Displays a message according to the signal received by the “Auto detect 3D”. (Off/On)2D->3D depth Adjusts 3D depth. Available only when “2D->3D” is selected in “3D format select”.(Minimum/Medium/Maximum)3D adjustment See above. (3D adjustment (Off/On), Effect (-3 to +3))Left/Right swap Change this to On when the phases are reversed. (When there is an unusual sense of depth.)(Normal/Swapped)Diagonal line filter On: Resolves discomfort caused by receiving a quincunx matrix signal. (Off/On)Safety precautions Displays message for viewing 3D images.* The perceived three dimensional effects of the 3D Eyewear differ from person-to-person.* If a signal received from an external device is different from the 3D setting of the TV, such as 2D signal when the TV is set to3D mode, the images may not be displayed correctly.