Panasonic Toughbook FZ-T1 Series Operating Instructions Manual

Also see for Toughbook FZ-T1 Series: Operating instructions

Panasonic Toughbook FZ-T1 Series Operating Instructions Manual Manual pdf 28 page image

3. Enter the unit’s PIN or password, and then tap [ ].• This is the same PIN or password used for the screen lock feature (see “Locking the screen”(page 27)).4. Tap [DISABLE SD CARD ENCRYPTION].[DeviceManagement] appYou can disable the unit’s individual hardware features to prevent access to certain functions.IMPORTANT• A password must be set in order to use this feature. If you forget this password, there is no way toreset it (it is not erased if the unit is reset using the factory data reset utility) and therefore you willno longer be able to change this feature’s settings. If you forget the password, contact your technicalsupport representative.Enabling and disabling certain hardware features1. Swipe up the home screen, and then in the app list, tap [DeviceManagement] ® [Device settingitems].2. Select the desired feature and then select the desired setting.• Repeat this step to change the settings for other features, if desired.3. Tap [APPLY], enter the password and then tap [OK].• If a password is not set, you will be prompted to create a new one.Note• Some settings will take place the next time the corresponding hardware component is connected,mounted, etc.Changing or deleting the password used for [DeviceManagement]1. Swipe up the home screen, and then in the app list, tap [DeviceManagement] ® [Passwordsettings].2. Select the desired item and then follow the on-screen instructions.28 Operating Instructions - Reference ManualSecurity