Panasonic Toughbook CF-U1GQG6L2M Reference Manual

Also see for Toughbook CF-U1GQG6L2M: Operating instructions Specifications Installation manual

Panasonic Toughbook CF-U1GQG6L2M Reference Manual Manual pdf 83 page image

83Wireless LANA Click or on the notification area and click [Open Network and Sharing Center].B Click [Change adapter settings].C Right-click [Wireless Network Connection] and click [Enable].• A standard user needs to enter an administrator password.• When [Disable] is displayed, [Wireless Network Connection] is already enabled.D Turn on wireless LAN in the Wireless Switch Utility.NOTEz You can use the following procedure instead of turning on wireless LAN in the Wireless Switch Utility.A Click (Start) - [Control Panel] - [Adjust commonly used mobility settings].B Click [Turn wireless on] in [Wireless Network].• When [Turn wireless off] is displayed, the wireless network is already on.• If you cannot select [Turn wireless on], the wireless switch is turned off.Setting the wireless LAN access pointPreparationFollow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the computer.1 Turn the wireless LAN on.2 Click or on the notification area.3 Select an access point, and click [Connect].4 Input the key you set for the access point to recognize the computer, and click [OK].Wait for the computer to connect to the wireless LAN access point.When the icon on the notification area is changed to , the wireless LAN setting is complete.5 Click [Close].NOTEz The settings depend on the network environment. For further information, ask the system administrator or the personin charge of the network.z If you use the stealth type wireless LAN access point which restricts automatic detection of the wireless LAN accesspoint, take the following procedure.If you do not perform the procedure below, you may not be able to access the wireless LAN access point automaticallyor the wireless LAN access point may not be displayed on the [Connect to a network] screen.A Click , or on the notification area, click [Open Network and Sharing Center] - [Set up a new connection ornetwork] - [Manually connect to a wireless network] and click [Next].B Input necessary information and add check marks for [Start this connection automatically] and [Connect even if thenetwork is not broadcasting] and click [Next].