Panasonic Toughbook CF-74JDMBD2M Reference Manual

Also see for CF-74 Series: Operating instructions Supplementary guide Supplementary guide Supplementary instructions Operating instructions

Contents

Panasonic Toughbook CF-74JDMBD2M Reference Manual Manual pdf 80 page image

80Troubleshooting (Advanced) Connecting PeripheralsAn error occurs while installing thedriver.z When you install a driver of card or peripheral device, make sure that the driveris compatible with the operating system. If it is not compatible, malfunction mayoccur. For information about the driver, contact the manufacturer of the periph-eral device.z Before connecting peripheral equipment, first determine the media thatcontains the peripheral device’s driver (e.g., CD-ROM), then attach the devicefor that media to the multimedia pocket. Once the installation screen for thedevice’s driver appears, equipment you then connect to the multimedia pocketwill not be recognized.A peripheral device does not work. z Install the driver.z Contact the manufacturer of the device.z When operation resumes from standby or hibernation, devices such as amouse, modem and PC Card may not function properly. In this case, restart thecomputer or reinitialize the device.z When is displayed in the Device Manager, remove and insert the device. Ifthe problem persists, restart the computer.z When you set [USB Port] to [Disable] in the [Advanced] menu of the Setup Util-ity (Î page 67), USB ports of mini port replicator are also disabled.z The computer may not recognize the connection/removal of some devices, ormay not operate normally with some devices.A Click [start] - [Control Panel] - [Performance and Maintenance] -[System] - [Hardware] - [Device Manager].B Select the device and remove the check mark for [Allow the computerto turn off this device to save power] in [Power Management]. (Thisitem may be unavailable for some types of devices.)The connected mouse does not work. z Check the mouse connection.z Install the driver compatible with the connected mouse.If the mouse does not work even after installing the driver, set [Touch Pad] to[Disable] in the [Main] menu of the Setup Utility (Î page 66).