Panasonic Toughbook CF-74JCL02AM Reference Manual

Also see for CF-74 Series: Operating instructions Supplementary guide Supplementary guide Supplementary instructions Operating instructions

Panasonic Toughbook CF-74JCL02AM Reference Manual Manual pdf 64 page image

64LANEnabling/Disabling the Wake Up from wired LAN functionWhen the Wake Up from wired LAN function is enabled, the computer automatically resumes from standby or hibernationwhen the computer is accessed from the network server via the internal LAN port. (Default setting)The Wake Up from wired LAN function can be switched to enable/disable by performing the following procedure.1 Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -[Device Manager] - [Network adapters] and double-click [Intel(R) 82567LM Gigabit Net-work Connection], and then click [Power Management].2 Select the setting for [Allow the computer to turn off this device to save power] and[Allow this device to bring the computer out of standby], and click [OK].z We recommend you to make the above 2 settings ON/OFF simultaneously.NOTEz The computer may start up if accessed by another computer on the network.The following procedure can be used to prevent startup due to unintentional access by a computer.A Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager] -[Network adapters] and double-click [Intel(R) 82567LM Gigabit Network Connection], and then click [PowerManagement].B Add a check mark for [Only allow management stations to bring the computer out of standby], and click [OK].