Panasonic Toughbook CF-31GT2AX2M Reference Manual

Also see for CF-31 Series: Supplementary instructions Operating instructions Operating instructions Operating instructions Reference manual

Panasonic Toughbook CF-31GT2AX2M Reference Manual Manual pdf 113 page image

113Troubleshooting (Advanced)Access point is not detected. z Shorten the distance between the computer and the access point, and try thedetection again.zConfirm the following settings:• [Wireless LAN] in the [Advanced] menu of the Setup UtilityConfirm that [Wireless LAN] is set to [Enabled] (Î page 92).• Wireless SwitchSlide the wireless switch to ON.• Wireless Switch UtilityConfirm that Wireless LAN is ON (Î page 76).Confirm that / / / is displayed on the notification area.If / / / is not displayed on the notification area, turn on thewireless communication (Î page 75).z This computer uses channels 1 through 11*4 when using IEEE802.11b/g.Check the channel being used by the access point.*4 In the case of wireless communications, the frequency band being used can be dividedinto segments, so that different communications can be conducted on each bandsegment. A “Channel” refers to the individual frequency bandwidth divisions. Connecting PeripheralsAn error occurs while installing thedriver.z When you install a driver of card or peripheral device, make sure that the driveris compatible with the operating system. If it is not compatible, malfunction mayoccur. For information about the driver, contact the manufacturer of the periph-eral device.z Before connecting peripheral equipment, first determine the media thatcontains the peripheral device’s driver (e.g., CD-ROM), then attach the devicefor that media to the multimedia pocket. Once the installation screen for thedevice’s driver appears, equipment you then connect to the multimedia pocketwill not be recognized. Wireless Communication (only for model with wireless LAN/wireless WAN)