Panasonic Toughbook CF-19RDRAX6M Reference Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Operating instructions Supplementary guide Operating instructions

Panasonic Toughbook CF-19RDRAX6M Reference Manual Manual pdf 90 page image

90LANEnabling/Disabling the Wake Up from wired LAN functionWhen the Wake Up from wired LAN function is enabled, the computer automatically resumes from sleep*2 or hibernationwhen the computer is accessed from the network server via the internal LAN port. (Default setting)The Wake Up from wired LAN function can be switched to enable/disable by performing the following procedure.1Click (Start) - [Computer] - [System properties] - [Device Manager].z A standard user needs to enter an administrator password.Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] -[Device Manager].2 Double-click [Network adapters]- [Intel(R) 82577LM Gigabit Network Connection].3 Click [Power Management], add (to enable) or remove (to disable) check marks of [Allowthe computer to turn off this device to save power] and [Allow this device to wake thecomputer] *3 , and then click [OK].z We recommend you to make the above 2 settings ON/OFF simultaneously.NOTEz The computer may start up if accessed by another computer on the network.The following procedure can be used to prevent startup due to unintentional access by a computer.AClick (Start) - [Computer] - [System properties] - [Device Manager].z A standard user needs to enter an administrator password.Click [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hardware] - [Device Manager].B Double-click [Network adapters] - [Intel(R) 82577LM Gigabit Network Connection].C Click [Power Management], add a check mark for [Only allow a magic packet to wake the computer]*4 , and thenclick [OK].*2 Windows XP: standby*3 Windows XP: [Allow this device to bring the computer out of standby.]*4 Windows XP: [Only allow management stations to bring the computer out of standby.]