Panasonic Toughbook CF-19PJRFXAM Reference Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Operating instructions Supplementary guide Operating instructions

Panasonic Toughbook CF-19PJRFXAM Reference Manual Manual pdf 47 page image

47External DisplayYou can switch the output destination to an external display.Connect the external display to the external display port (A).NOTEz After resuming from sleep or hibernation, or restarting the computer, the output destination may not be the same asthe one selected in the previous status.z When you change the display after Windows starts up, do not press any key until switching is complete.z Until Windows startup is completed (during Setup Utility, etc.), the simultaneous display cannot be used and pressingFn+F3 switches the display between the internal LCD and the external display.z Display switching by pressing Fn+F3 may not work when you use the Fast User Switching function to switch the user.In this case, log off all users and restart the computer.z Do not connect or remove the external display during sleep or hibernation.z It may take some time to switch between displays depending on the displays used.z When you use high resolution displays, the display color, resolution or refresh rate may be changed, switching to[Notebook] in [Intel ® Graphics Media Accelerator Driver for mobile].We recommend you to switch the output destination by pressing Fn+F3.z When you use the external display only, set the suitable number of colors, resolution, or refresh rate separately fromwhen you use the internal LCD only or when you use the simultaneous display.Depending on the settings, some external displays may be distorted or may not display the mouse cursor correctly. Inthis case, set the settings to lower value.z When you use the simultaneous display, DVD-Video, MPEG files and other motion image files may not be played backsmoothly.z Carefully read the instruction manual of the external display.z When connecting an external display that does not conform to the Plug & Play standards, select the display driveraccordingly in the following menu, or use the driver disc supplied with the monitor.A Click (Start) - [Control Panel] - [Adjust screen resolution] - [Advanced Settings] - [Monitor] - [Properties].• A standard user needs to enter an administrator password.B Click [Driver] - [Update Driver].