Panasonic Toughbook CF-19KDRAG6B Reference Manual

Also see for CF-19 series: Supplementary instructions Operating instructions Operating instructions Supplementary guide Operating instructions

Panasonic Toughbook CF-19KDRAG6B Reference Manual Manual pdf 51 page image

51USB Devices To connect the USB device1 Open the cover and connect the USB device to one of the USBports (A).For further information, refer to the instruction manual of the USB device. To remove the USB device1 Disable the USB device.A Click on the notification area and click .B Select the USB device.z These steps are not necessary when;• Removing the device after turning off the computer.• is not displayed.• The device does not appear in the list in step A.2 Remove the USB device.NOTEz You may need to install the driver for the USB device. Follow the on-screen instructions or refer to the instruction man-ual of the USB device.z You may need to install the driver again when connecting the device to another port.z If the computer enters sleep or hibernation while a USB keyboard or mouse is connected, touching the USB keyboardkeys or mouse will resume the computer.z When a USB device is connected, sleep and hibernation may not function normally. If the computer does not start upnormally, remove the USB device and restart the computer.z When the USB device is removed and then inserted while the computer is on, may appear in the Device Managerand the device may not be correctly recognized. In this case, remove and connect the device again, or restart the com-puter.z When the USB device is connected, power consumption increases. Remove the USB device when it is not in use,especially when operating by battery power.Connecting/Removing USB Devices