Panasonic TY-WK65PV7 Installation Instructions Manual

Contents

installation procedure

Panasonic TY-WK65PV7 Installation Instructions Manual Manual pdf 2 page image

7 EnglishPrecautions with regard to setting upWARNINGInstallation and removal should only be carried out by a qualified technician.• If the bracket is installed incorrectly, the display may fall down and personal injury may result.Make sure that all safety factors regarding strength of installation are observed.• If the installation strength is insufficient, the display may fall down and personal injury mayresult.Do not install in places which are unable to bear loads.• If the strength of the installation surface is insufficient, the display may fall down and personalinjury may result.CAUTIONDo not install in places which are subject to humidity, dust, oil fumes, water vapour orexcessive heat.• These can have adverse effects on Plasma Display operation, and fire or electric shocks mayresult.Do not install the Plasma Display face up, sideways or upside down.• Doing so may cause heat to build up inside the display, and fire may result.Two people are required to install and remove the display.• If two people are not present, the display may be dropped, and personal injury may result.Maintain a space of at least 10 cm 3 15 / 16 inches at the top, bottom and sides of thedisplay, and at least 7.5 cm (2 61 /64 inches) at the rear of the display.• The display has ventilation outlet holes on the rear, and ventilation inlet holes on the bottom,sides and rear. Covering these may result in a fire.