Panasonic TY-TP50P10S - Touch-screen - Wired Operating Instructions Manual

Also see for TY-TP42P10S - Touch-screen - Wired: Operating instructions Service manual

Panasonic TY-TP50P10S - Touch-screen - Wired Operating Instructions Manual Manual pdf 5 page image

5READ FIRST!Precautions with regard to setting upCautions when in useAlways keep the touch panel clean.• This optical touch panel utilizes infrared rays and may operate incorrectly if the infrared transmissive partbecomes soiled. Use a soft dry cloth to clean the infrared transmissive part once every day.Use a power supply within the rated voltage range.• Be sure that the power supply used conforms to the rated voltage. Use with a power supply exceeding the ratingmay cause incorrect operation or malfunction.Keep the equipment away from locations subject to heavy electrical noise.• Avoid use near equipment that produces excessive electrical noise. Noise may enter the equipment via thepower supply or interface and cause incorrect operation.Do not touch the infrared transmissive area until starting OS.• After turning on the PC, be sure not to touch the infrared transmissive area on the screen until the PChas completed the starting of its OS. If this is not observed, device errors may be detected by the PC andsubsequently it will not operate correctly. Should this occur, please restart the PC.• When connecting or disconnecting the USB cable, be careful not to touch the infrared transmissive area.Keep foreign matter out of the equipment.• Do not allow metal objects or combustible material to fall or be inserted into the equipment through openings.Using the equipment with foreign matter inside may cause problems such as electric shock or malfunction.Keep away from water.• If water or any other liquid gets inside the equipment it may cause fire, electric shock or malfunction. Donot place containers that hold liquid (flower vases, fish bowls, cosmetics, chemicals or water) on top of theequipment.Do not place heavy objects on the equipment.• The touch panel is made of sheet metal. It is dangerous to place heavy objects on top of it.Use only the touch pen included with this touch panel. Operation is not guaranteed with other products.Setup locationBefore setting up the touch panel, select an optimal location by following the precautions below.Places where the equipment should not be setup include:• Locations subject to extremely high or low temperature• Locations subject to high humidity• Locations exposed to direct sunlight, and locations near powerful light sources(This is an optical touch panel, so you should be particularly careful of this point)• Locations subject to excessive dust• Locations exposed to shock or vibration• Locations near emissions of chemicals or steam, or locations where contact may be made with chemicals• Locations near sources of electrical noise (generators, air conditioners etc.)