35SpecificationsModel NumberTypePower SourceVoltageElectric currentSupply systemTouch PanelDetection systemPanel window (W × H)Detection range (W × H)Effective detection rangeResolution (W × H)Detection pitchOutput systemNumber of optic elements (W × H)Optic element pitch (W × H)Minimum stylus size (W × H)Touch penUSB Interface (USB 1.1)TemperatureHumidityResistance to extraneous lightPanel formExternal dimensions (W × H × T)WeightExtruded materialTY-TP42P8-S TY-TP50P8-SOptic Touch PanelDC + 5 V ± 10 %DC + 5 V Max 400 mAfrom USB Bus Power (DC + 5 V Max 500 mA)Infrared obstruction detection system945.2 mm × 531.2 mm (37.2 ″ × 20.9 ″) 1129.2 mm × 645.2 mm (44.4 ″ × 25.4 ″)920 mm × 516 mm (36.2 ″ × 20.3 ″) 1104 mm × 620 mm (43.4 ″ × 24.4 ″)Detection range + 1.0 mm (0.04 ″) at the top, bottom, left and right1,841 × 1,033 ∗1 2,209 × 1,241 ∗12.0 mm × 2.0 mm (0.08 ″ × 0.08 ″)Coordinate output231 × 130 elements 277 × 156 elements4.0 mm × 4.0 mm (0.16 ″ × 0.16 ″)6.0 mm × 6.0 mm (0.24 ″ × 0.24 ″)Infrared systemWhen operating: 0°C (32°F) to 40°C (104°F) (temperature gradient 25°C (77°F)/hr max.) ∗2When operating: 20% to 80% (must be no condensation) ∗2Lateral light: 2,000 lux MIN +20% (angle of incidence: 20°)Frontal light: 10,000 lux MIN +20% (angle of incidence: 90°)Flat panel (Flat type)1,073 mm × 659 mm × 69 mm 1,257 mm × 773 mm × 69 mm(42.2 ″ × 25.9 ″ × 2.7 ″) (49.5 ″ × 30.4 ″ × 2.7 ″)(Excluding mounting brackets) (Excluding mounting brackets)approx. 5.0 kg (11 lbs) Excluding mounting brackets approx. 5.8 kg (12.7 lbs) Excluding mounting bracketsAluminumNotes:∗1 When it is used with exclusive driver software.∗2 This applies to the touch panel alone. When the panel is attached to a device such as a PDP, follow theenvironmental conditions for the device being used.Terminal No. and Signal name(TYPE B)USB cable length: 2 m (6.56 ft) 12 431 Vcc- DATA 2+DATA 3 4 GND