Panasonic TY-TP42P8-S Service Manual

Also see for TY-TPEN6 - Stylus - Wireless: Operating instructions Service manual

Panasonic TY-TP42P8-S Service Manual Manual pdf 2 page image

1 Prevention of Electro Static Discharge (ESD) toElectrostatically Sensitive (ES) Devices 42 About lead free solder (PbF) 53 External dimensions 64 Setup for Touch Panel 75 Touch Pen (Option) 216 Printed Circuit Board Structure 226.1. TY-TP42P8-S 226.2. TY-TP50P8-S 237 Trouble shooting 247.1. Checking procedures 247.2. Test Program 268 Conductor Views 358.1. X-Photo1, X-Photo2, Y-Photo1 Board (42inch) 358.2. X-Photo1, X-Photo2, X-Photo3, Y-Photo1, Y-Photo2 Board(50inch) 368.3. X-Photo3 Board (42inch) 378.4. X-Photo4 Board (50inch) 388.5. Y-Photo2 Board (42inch) 398.6. X-LED1, X-LED2, Y-LED1 Board (42inch) 408.7. X-LED1, X-LED2, X-LED3, Y-LED1, Y-LED2 Board(50inch) 418.8. X-LED3 Board (42inch) 428.9. X-LED4 Board (50inch) 438.10. Y-LED2 Board (42inch) 448.11. Controller Board (42inch) 458.12. Controller Board (50inch) 468.13. Pen-Receive Board (42inch) 478.14. Pen-Receive Board (50inch) 489 Block Diagram 499.1. Overall Block Diagram (TY-TP42P8-S) 499.2. Overall Block Diagram (TY-TP50P8-S) 509.3. Detail Block Diagram (1 of 3) 519.4. Detail Block Diagram (2 of 3) 529.5. Detail Block Diagram (3 of 3) 5310 Schematic Diagram 5510.1. Controller Board Schematic Diagram 5510.2. X-Photo 1 Board Schematic Diagram 5610.3. X-Photo 2 Board Schematic Diagram 5710.4. X-Photo 3 Board Schematic Diagram 58Minimum stylus size (W × H) 6.0 mm × 6.0 mm (0.24” × 0.24”)Scan speed Initial touch: 30 ms/frame max.; during movement: 8 ms/frame max.Touch pen Infrared systemUSB Interface (USB 1.1) Terminal No. and Signal name(TYPE B)No.1 Vcc No.2 -DATANo.3 +DATA No.4 GNDTemperature When operating 0°C (32°F) to 50°C (122°F) (temperature gradient 25°C (77°F)/hr max.) *2When not operating: -20°C (-4°F) to 60° (140°F) temperature gradient 25°C (77°F)/hr max.Humidity When operating: 20% to 85% (must be no condensation) *2When not operating: 10% to 95%Resistance to extraneous light Lateral light: 2,000 lux MIN +20% (angle of incidence: 20°)Frontal light: 10,000 lux MIN +20% (angle of incidence: 90°)Panel form Flat panel (Flat type)External dimensions (W × H × T) 1,073 mm × 659 mm × 69 mm(42.2” × 25.9” × 2.7”)(Excluding mounting brackets)(TY-TP42P8-S)1,257 mm × 773 mm × 69 mm(49.5” × 30.4” × 2.7”)(Excluding mounting brackets)(TY-TP50P8-S)Weight 5.0 kg (11 lbs) Excluding mounting brackets(TY-TP42P8-S)5.8 kg (12.7 lbs) Excluding mounting brackets(TY-TP50P8-S)Extruded material AluminumNotes:*1*2When it is used with exclusive driver software.This applies to the touch panel alone. When the panel is attached to a device such as a PDP, follow the environmental conditions for thedevice being used.CONTENTS Page Page2TY-TP42P8-S / TY-TP50P8-S