Panasonic TY-S42PX20U User Manual

Also see for TY-S42PX20U: Instructions

Panasonic TY-S42PX20U User Manual Manual pdf 1 page image

TQZH507 Printed in Japan1. Align the support pole insertion holes of the plasma TV with the support poles (1 each), andlower the plasma TV until the poles stop. Slightly lift the left and right sides of the plasma TV andremove the corner protection pads attached to the bottom.2. Fasten the plasma TV and support poles using assembly screws (black screws) (× 4)Ref. DescriptionTop crosspieceBottom panelSide panel (Left)Side panel (Right)Rear cord coverGlass shelfCord holderTY-S50PX20UPart No.TBLA0117TBLH0550TBLA0104TBLA0103TBLB3110TKGA0129TBLA3217TY-S42PX20UQty. Part No.1 TBLA01161 TBLH05481 TBLA01041 TBLA01031 TBLB30801 TKGA01271 TBLA3184REPLACEMENT PARTS LISTTo maintain appearance we recommend the following:Painted Surfaces:Use a damp cloth for cleaning. Do not use any abrasive or chemically treated cleaners.NOTE: As with all indoor furniture, this unit should not be exposed to direct sunlight, extreme temperaturesor moisture, as this can result in serious irreparable damage.When making a part (s) inquiry or for out of warranty purchasesplease quote part no. & description.Placement• To thread wiring, remove the terminal cover and pass wires along thegrooves in the rear cord cover, along the groves in the left and rightside panels, and along the groves in the cord holder under the glassshelf.∗ Some equipment may have short cords. In such an instance, threadthe wiring over the minimum distance, as indicated by the dotted line inthe diagram.• After threading wiring, fasten with cord clamps (× 6) so that the cordsdo not protrude from the grooves. Finally, attach the terminal cover.If there are any cord clamps left over, store them carefully. You willneed them if you use the unit to house more equipment in the future.A study of the assembly instructions will not only save you time, but may prevent possible damage to yournew stand.Assistance may be required for some assembly procedures.CAUTION : THIS STAND IS DESIGNED ONLY FOR USE WITH A PANASONIC PLASMA TV.APPLIED MODEL : TH-42PX20, TH-50PX20Use with other appliances may result in instability causing possible injury.Replacement partsAssembly screws Glass shelf fastening screws Glass shelf support fasteningscrews (Black screws) ( × 4)Rear cord cover fasteningscrews (Black screws) ( × 3)Assembly screws (Black screws)Support pole (Right) Support pole (Left) Cord clampsTHEA118 × 4 THEA102N × 8XSB4+12FZ × 7XST5+12 × 4 XYN5+F55FZ × 4TBLA3194 × 2TBLA3197 × 1 TBLB3111 × 6Bottom cap (Right)TBLB3107 × 1Bottom cap (Left)TBLB3108 × 1ScrewsXTB4+10B × 4TBLA3196 × 1Support pole fastening screwsGlass shelf supports (Right) Glass shelf supports (Left) Casters (Wheels)TBLA3195 × 2 TBLB3074 × 4Your hardware pack contains / Replacement parts∗ Wire over the minimum distanceCord clamps Power cord(Back)∗ The top glass shelf is specifically for the center speaker and AVamp. If you place a video deck here, it may badly affect the picture.PANASONIC SERVICES COMPANY20421 84th Avenue South, Kent, Washington 98032 Tel. : 1-800-833-9626 Fax : 1-800-237-90802003 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.Panasonic Canada Inc.5770 Ambler Drive, Mississauga, Ontario L4W 2T3 Tel. : (905) 624-84472003 Matsushita Electric Industeial Co., Ltd. All rights reserved. Unauthorized copying and distribution is a violation of law.Assembly InstructionsTY-S42PX20UTY-S50PX20UDisplay standIMPORTANTFor improvement purposes, design and specifications are subject to change without notice.STEP 1 Plasma TV installation and fastening method∗ Install the plasma TV by referring to the following illustration.∗ Do not hold the plasma TV at the bottom of the front panel.Lift andremoveSupport pole(Left)Assembly screws(Black screws)Cornerprotection padSupport pole (Right)Support poleinsertion hole∗ Position by placing your hands at thepoints indicated in the illustration.STEP 2 To use with equipment such as a video deckThe tools required:Plus (Phillips) (+) screwdriver

/ 2

Related manuals for Panasonic TY-S42PX20U