146.4. Hotel mode1. PurposeRestrict a function for hotels.2. Access command to the Hotel mode setup menuIn order to display the Hotel mode setup menu, pleaseenter the following command (within 2 second).[TV] : Vol. [Down] + [REMOTE] : AV (3 times)Then, the Hotel mode setup menu is displayed.3. To exit the Hotel mode setup menuDisconnect AC power cord from wall outlet.4. Explain the Hotel mode setup menuitem FunctionHotel Mode Select hotel mode ON/OFFInitial INPUT Select input signal modes.Set the input, when each time power is switchedon.Selection :Off/DVB-C/DVB-T/Analog/AV1/AV2/AV2S/AV3/COMPONENT/HDMI1/HDMI2/HDMI3• Off: give priority to a last memory. However,Euro model is compulsorily set to TV.• AVnS/AVnC: only Euro model selectable• PC: selectable with VGA optionInitial POS Select programme number.Selection :Off/0 to 99• Off: give priority to a last memoryInitial VOL level Adjust the volume when each time power isswitched on.Selection/Range :Off/0 to 100• Off: give priority to a last memoryMaximum VOLlevelAdjust maximum volume.Range :0 to 100Button lock Select local key conditions.Selection :Off/SETUP/MENU/ALL• Off: altogether valid• SETUP: only F-key is invalid(Tuning guide(menu) can not be selected.)• MENU: only F-key is invalid(only Volume/Mute can be selected.)• ALL: altogether invalid.Remote lock Select remote control key conditions.Selection :Off/SETUP/MENU• Off: altogether valid• SETUP: only Setup menu is invalid• MENU: Picture/Sound/Setup menu are invalid
