38Set DVB channel manually Manual TuningNormally use “Auto Setup” or “Update Channel List” to retune DVB channels.If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function.All channels found will be added to the Channel List.●DVB-S:DVB-S Manual TuningTransponder FrequencyAnalogue Scan 21 68Signal Strength 0 10Signal Quality 0 1010847 MHzSatellite Astra 19.2° EPolarisation HorizontalSymbol Rate AutoService ID AutoModulation AutoPlease consult the received satellitebroadcasting companies for the setting.Set the satellite Set “Transponder Frequency”,“Symbol Rate”, “Polarisation”,“Modulation” and “Service ID”Searchselectsetselectsetabc defjklghi mnotuvpqrs wxyzDVB-C:Enter the frequency Searchabc defjklghi mnotuvpqrs wxyzDVB-C Manual TuningAnalogue Scan 21 68Symbol RateNo. Channel Name Type NewFree TV: 0 Pay TV: 0 Radio: 0 Data: 0StoppedSignal Strength 0 10Signal Quality 0 10AutoFrequency 474,00 MHzSet Symbol Rate, and then perform this function.Normally set Symbol Rate “Auto”.●DVB-T:select channeladjust frequencySearchDVB-T Manual TuningAnalogue Scan 21 68No. Channel Name Type NewFree TV: 0 Pay TV: 0 Radio: 0 Data: 0StoppedSignal Strength 0 10Signal Quality 0 10Frequency 474,00 MHz[CH21]Set where the level of “Signal Quality” becomes the maximum.Update DVB channel automatically Update Channel ListYou can add new channels, delete removed channels, update channel name and position automatically toChannel List.DVB-T Update Channel ListCH Channel Name Type QualitySearchingAnalogue Scan 21 68Progress CH 5 69This will take about 3 minutes.Free TV: 0 Pay TV: 0 Radio: 0 Data: 0Channel List is updated with keeping your settings in Favourites Edit,●Channel List, Child Lock, etc.To update DVB-S channels, the satellite, search mode and scan mode●settings are required before updating.DVB-S Auto Setup SettingsScan Mode QuickFree ChannelsSearch ModeAstra 19.2° ESatellite setselectstoreTuning and Editing Channels(DVB)