Menu
Panasonic TX-P42GT50Y Operating Instructions Manual
Also see for Viera TX-P42GT50Y: Operating instructions
                                                |
English183D Eyewear (optional)● Use the Panasonic 3D Eyewear that has this logo and supportsBluetooth ® wireless technology.“Full HD 3D Glasses™” logo indicates products that are compatible with the active shutter 3Dglasses technology standards licensed by the Full HD 3D Glasses Initiative. The RF mark onthe logo means the wireless system (Bluetooth ® wireless technology), and you can use the 3DEyewear and the TV that have the same mark together.Note● Use the 3D Eyewear within approximately 3.2 m from the TV. You cannot view the 3D images with the 3D Eyeweartoo far from the TV, because of the difficulty of receiving radio waves from the TV.● The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surroundingenvironment.● There are differences in the viewing range of the 3D Eyewear among individuals.● The 3D Eyewear may not operate correctly at the outside of the viewing range.To view the 3D imagesYou can enjoy the 3D images in a variety of ways.(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format)● Connect the 3D-compatible player via a fully wired HDMI compliant cable.● If input mode is not switched automatically, select the input mode connected to the player.● If you use the non 3D-compatible player, the images will be displayed on 2D mode.■ 3D-supported broadcast● Please consult the suppliers of contents or programmes for availability of this service.■ 3D photos and 3D videos taken by 3D-compatible Panasonic products● Available in Media Player and Network services■ 2D images converted to 3D● Set to [2D 3D] mode in [3D Mode Selection].PreparationsPerform the First Registration when the 3D Eyewear is used for the first time. For details, read the manual of the 3DEyewear.1 Turn the 3D Eyewear on and put it on● Connection status and battery status are displayed on the bottom right of the screen.2 View the 3D images● Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view3D images.If you select [Yes], this message will be displayed again in the same condition after Mains power On / Offswitch is next turned on. Select [No] if you do not want to display this message again.● Turn off the 3D Eyewear after using it. |
Related manuals for Panasonic Viera TX-P42GT50Y
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved