English30USB HDD RecordingYou can record the digital TV programmes to theconnected USB HDD and enjoy playing back in variousways. For details, refer to [eHELP] (Recording). PreparationConnect the USB HDD to the USB 1 port with the USBcable. Prepare the USB HDD for the exclusive use ofrecording with this TV. Be sure to connect the USB HDD to the mainssocket. To remove the USB HDD safely from the TV[Safely remove USB] in [USB Device Setup](Setup Menu) Check the terminal type and cable plugs are correctfor connection. Be sure to remove the cable cover before connectingor disconnecting cables. (p. 12)Mains socketUSB HDDUSB cableSetting for USB HDDFormat and set up the USB HDD with this TV in order touse it for recording. Please note that USB HDD will be formatted and alldata in it will be erased after this setup. Before setting, connect the USB HDD and be sure toturn on the USB HDD.1 Display the menu and select [Setup]Setupselectaccess2 Select [USB Device Setup]selectaccess3 Select the USB HDD for recording andstart setupUSB Drive AUSB Flash DiskUSB Device SetupProduct Nameselectstart setup Follow the on-screen instructions.Recording1 Display the menu and select [Setup]Setupselectaccess2 Select [Recording Setup]selectaccess[One Touch Recording]Records the current programme to the USB HDDimmediately. Confirm the remote control code is “73” (p. 27).Select the maximum recording time1/2One Touch Recording 180 minutesRecording Setupselectaccess / store To start One Touch Recording[REW LIVE TV]Records the current programme to the USB HDDconstantly within the maximum recordable time. Confirm the remote control code is “73” (p. 27).Select [Auto] to start [REW LIVE TV]REW LIVE TV AutoRecording Setupselectaccess / start [REW LIVE TV] When you select [Auto], recording will startautomatically.