- 90 -3D Eyewear - Registration■ First registrationPerform the first registration when the 3D Eyewear is used for the first time.1. Turn the TV on.2. Press Power button for about 1 second to turn the 3D Eyewear on.● The lamp lights for about 2 seconds and then flashes.● The 3D Eyewear will be turned on and the registration will start.● Place the 3D Eyewear within 50 cm from the TV while registration is inprogress.3. After the registration is successfully completed, the 3D Eyewear willreconnect with TV automatically when the 3D Eyewear is turned on nearthe TV in 3D mode.■ Registration againWhen connection with the registered TV fails, or when using with another TV,re-register the 3D Eyewear.1. Turn the TV on.2. Within 50 cm from the TV, press Power button until lamp lights, thenrelease it to start registration.3. After the registration is successfully completed, the 3D Eyewear willreconnect with TV automatically when the 3D Eyewear is turned on nearthe TV in 3D mode.= Note =● If the registration failed, the 3D Eyewear will be turned off. In this case,turn the TV off and perform from step 1.
