English 93BRemoving the pedestalBe sure to remove the pedestal in the followingprocedures when you use the wall-hanging bracket orrepack the TV.1 Remove the assembly screws from the TV.2 Pull out the pedestal from the TV.3 Remove the assembly screws from the bracket.Installing the wall-hanging bracketPlease contact your local Panasonic dealer to purchasethe recommended wall-hanging bracket. Holes for wall-hanging bracket installationRear of the TVab43-inch model49-inch modela: 200 mmb: 200 mm55-inch model65-inch modela: 400 mmb: 400 mm(View from the side)Depth of screw43-inch model 49-inch modelminimum: 9 mmmaximum: 21 mm55-inch modelminimum: 8 mmmaximum: 16 mm65-inch modelminimum: 9 mmmaximum: 16 mmDiameter: M6Screw for fixing the TV onto thewall-hanging bracket (not supplied withthe TV)Warning Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk of personalinjury and product damage. In order to maintain theunit’s performance and safety, be absolutely sure toask your dealer or a licensed contractor to securethe wall-hanging brackets. Any damage caused byinstalling without a qualified installer will void yourwarranty. Carefully read the instructions accompanying optionalaccessories, and be absolutely sure to take steps toprevent the TV from falling off. Handle the TV carefully during installation sincesubjecting it to impact or other forces may causeproduct damage. Take care when fixing wall brackets to the wall.Always ensure that there are no electrical cables orpipes in the wall before hanging bracket. To prevent fall and injury, remove the TV from its fixedwall position when it is no longer in use.