Speaker SelectionYou can control the theatre speaker with this TV’s remote control by pointingat the TV’s signal receiver.1. Display Apps with APPS.2. Select VIERA Link and press OK to access.3. Select Speaker Selection and press OK to access.4. Select TV / Home Cinema and press OK to set.TV:TV speakers are active.Home Cinema:The sound is delivered from theatre speakers. Player theatre, Blu-ray Disc theatre or Amplifier will be automatically turned on if it is inStandby mode.● The sound of TV speakers is mute. When the equipment is turnedoff, TV speakers will be activated.● You can use Volume Up / Down and MUTE.■ Multi-channel soundIf you want to enjoy the multi-channel sound (e.g. Dolby Audio (Dolby Digital)5.1ch) via an Amplifier, connect it with an HDMI cable and Optical digital audiocable, and then select Home Cinema. If your Amplifier has the “HDAVI Control5” function, you only need to connect it with an HDMI cable to the TV’s HDMI2terminal.To enjoy multi-channel sound from DIGA Recorder, connect an HDMI cablefrom the DIGA Recorder to the Amplifier.= Note =● If you cannot operate the equipment, check the settings and theequipment.Functions > VIERA Link “HDAVI Control™” > Summary of VIERA Link● Some operations may not be available depending on the equipment.- 235 -
