Panasonic TX-32PM11D Service Manual

Also see for TX-28PM11D: Operating instructions

Panasonic TX-32PM11D Service Manual Manual pdf 1 page image

Service ManualColour TelevisionTX-32PM11D, TX-32PM11FTX-32PM11P, TX-28PM11DTX-28PM11F, TX-28PM11PGP2 ChassisSPECIFICATIONS(Information in brackets [ ] refers to models TX-28PM11D/F/P)Power Source: 220-240V a.c., 50HzPower Consumption: 98W [82W]Stand-by PowerConsumption: 0,9WAerial Impedance: 75Ω unbalanced, Coaxial TypeReceiving System: PAL-I, B/G, D/K, PAL-525/60SECAM B/G, D/K, L/L’M.NTSC (AV only)NTSC (AV only)Receiving Channels:VHF E2-E12 VHF H1-H2 (ITALY)VHF A-H (ITALY) VHF R1-R2VHF R3-R5 VHF R6-R12UHF E21-E69 CATV (S01-S05)CATV S1-S10 (M1-M10) CATV S11-S20 (U1-U10)CATV S21-S41 (HYPERBAND)Intermediate Frequency:Video/AudioVideo 38,9MHz, 33,9MHzSound 33,4MHz (B/G), 33,16MHz (A2)33,05MHz (NICAM B/G,D/K,L)32,4MHz (D/K),32,66MHz (CZ STEREO)40,4MHz (L’), 39,75MHz (L’NICAM)Colour 34,47MHz (PAL)34,5MHz, 34,65MHz (SECAM)38,3MHz, 38,15MHz (SECAM L’)Terminals:AUDIO MONITOR OUT Audio (RCAx2) 500mV rms 1kΩAV1 IN Video (21 pin) 1V p-p 75ΩAudio (21 pin) 500mV rms 10kΩRGB (21 pin) 0,7V p-p 75ΩAV1 OUT Video (21 pin) 1V p-p 75ΩAudio (21 pin) 500mV rms 1kΩAV2 IN Video (21 pin) 1V p-p 75ΩAudio (21 pin) 500mV rms 10kΩS-Video IN Y: 1V p-p 75Ω(21-pin) C:0,3V p-p 75ΩAV2 OUT Video (21 pin) 1V p-p 75ΩAudio (21 pin) 500mV rms 1kΩAV3 IN S-Video IN Y: 1V p-p 75Ω(4-pin) C:0,3V p-p 75ΩAudio (RCAx2) 500mV rms 10kΩVideo (RCAx1) 1V p-p 75ΩHigh Voltage: 32kV ± 1kV [30,5kV ± 1kV]Picture Tube: W76EPA11X74 76cm[W66MAF185X02 66cm]Audio Output: 2x10W RMS, 2x20W MPO,8Ω impedanceHeadphones: 8Ω ImpedanceAccessoriessupplied : Remote Control2 x R6 (UM3) BatteriesDimensions:Height: 570mm [515mm]Width: 905mm [766mm]Depth: 550mm [529mm]Net weight: 56kg [38kg]Specifications are subject to change without notice.Weights and dimensions shown are approximate.ORDER No. PCZ0409018C2