Panasonic TX-32LXD600 Service Manual

Also see for Viera TX-26LXD600: Quick start guide Operating instructions

Panasonic TX-32LXD600 Service Manual Manual pdf 17 page image

Adjustment MethodSub-Contrast/White Balance AdjustmentInstrument Name Connect to Remarks1. Remote controller2. LCD WB meter (Minolta CS-1000A equivalent)3. Comunication jig4. Computer for external controlCorrelation can be also taken byCA-210 or equivalentProcedure RemarksSubcontrast adjustment1. Receive PAL colour bar (100% white) RF signal.2. Enter “Sub-Contrast” adj. In SERVICE 1 mode.3. Start adjusting by using Blue Key.4. If the adjustment finished normally, the letter of “Sub-Contrast” will changefrom red to blackWhite Balance adjustment1. Procedure basically perform checking using the production software and makeautomatic adjustment using external computer.2. It adjust in the mode of Colour balance Normal as follows.TX-32LXD600 TX-26LXD600TOP Normal TOP Normalx: 0,2800 ± 0,003 x: 0,2800 ± 0,003y: 0,2850 ± 0,003 y: 0,2850 ± 0,003GRAY Normal GRAY Normalx: 0,2800 ± 0,003 x: 0,2800 ± 0,003y: 0,2850 ± 0,003 y: 0,2850 ± 0,003The address of EEPROM to write is as followsAdd. C148-C159Let the panel standfor more than 3hours at more than 20 °C.Basically perform adjustment in theambient environment of roomtemperature more than 20 °C.The aging time is more than20 minat above room temperature.Applied signal100% full colour bar0,7V p-p white peak87.5% modulation17