Panasonic TX-32LX1X Service Manual

Also see for TC-26LX1H: Operating instructions

Contents

Panasonic TX-32LX1X Service Manual Manual pdf 13 page image

6.13. Front bracket1. Remove the rear AV bracket ass´y (See 6.3.) and the rearmetal frame. (See 6.4.)2. Disconnect the couplers (K3, JG3, JG6 and V1).3. Remove the fixing screws (2pcs).4. Remove the front bracket.6.14. K-Board1. Remove the front bracket. (See 6.13.)2. Remove the hooks (4place).3. Remove the K-Board.6.15. JG-Board1. Remove the front bracket. (See 6.13.)2. Remove the hooks (3place).3. Remove the JG-Board.6.16. V-Board1. Remove the front bracket. (See 6.13.)2. Remove the hooks (2place).3. Remove the V-Board.6.17. Main chassis1. Remove the rear AV bracket ass´y (See 6.3.) and the rearmetal frame. (See 6.4.)2. Disconnect the couplers (K3, JG3, JG6, V1, P2, P3, SPLand SPR) and the flexible cables (DG5).3. Remove the fixing screws (4pcs).4. Remove the main chassis. Disconnecting flexible cable from the coupler.Lift up both ends of the cable lock (brown colored)simultaneously to release the locking. Once the flat cable isdisconnected from the coupler, the cable lock tends todetach from the coupler easily. Due precaution should bepaid on it. Reconnecting flexible cable to the coupler.Attach the cable lock (brown) to the coupler (white) with itsboth ends being pulled up. Insert the flat cable into thecoupler over the cable lock until the cable stops firmly at thecoupler end. Press down both ends of the cable lock untiltheir upper faces are positioned flat to lock the cable.13TX-32LX1X / TX-32LX1M / TX-32LX1A / TX-32LX1T / TC-32LX1H / TC-32LX1DJ / TX-26LX1X / TX-26LX1M / TX-26LX1A / TX-26LX1T / TC-26LX1H