7.8. Removing the DG-Board1. Remove the rear AV bracket (See 7.4.) and the rear metalframe. (See 7.5.)2. Disconnect the couplers (DG6 and DG7), the flexible cable(DG3) and the bridge cables (DG4 and DG5).3. Remove the fixing screws (7pcs).4. Remove the DG-Board with DV-Board.7.9. Removing the DV-Board1. Remove the DG-Board with DV-Board. (See 7.8.)(See above figure in item 7.8.)2. Remove a fixing screw ( ) (reverse side) and remove thecopper foil sheet carefully not to brake.3. Disconnect the coupler (DV15-DG10) and remove the DV-Board.7.10. Removing the AP-Board1. Remove the rear AV bracket ass´y (See 6.4.) and the rearmetal frame. (See 6.5.)2. Disconnect the couplers (AP2, AP6 and AP10 (AC Cord))and the bridge cables (H1 (AP1) on the H-Board, P3/CN201(AP3) on the P-Board and DG4 (AP4) and DG5 (AP5) onthe DG-Board.3. Remove the fixing screws (7pcs).4. Remove the AP-Board.7.11. Removing the H-Board1. Remove the rear AV bracket (See 7.4.) (and the rear metalframe). (See 7.5.)2. Disconnect the flexible cable (H3), the bridge cable (H1)and the couplers (H4 and H5).3. Remove the fixing screws (4pcs).4. Remove the H-Board.15TX-32LXD52 / TX-26LXD52 / TX-32LX52F / TX-26LX52F / TX-32LX52L / TX-26LX52L / TX-32LX51F / TX-26LX51
