Panasonic TX-26LXD50 Operating Instructions Manual

Also see for TX-26LXD50: Service manual Service manual

Panasonic TX-26LXD50 Operating Instructions Manual Manual pdf 16 page image

16Tuning menu – Programme edit (Analogue mode)Renaming a programme channelMove to the Name column.Choose the new character. The box at the bottom of thescreen shows the character currently selected.Move to the next character position.Continue until renaming is done.Press the OK button to store the new name. OKProgramme editProg.ABCDEFGHIJKLMNOPQRSTUVWXYZ+- . 0123456789Chan. Name Lock1 :2 :3 :4 :5 :CH44CH51CH41CH47CH37OffOffOffOffOffXYZFTP123456Locking a programme channelYou may wish to lock a programme channel to preventaccess to it.Move to the Lock column.Choose between Lock On or Lock Off.Press the OK button to store the new setting.Note:When a programme position is locked, Direct ChannelAccess using the C and numeric buttons on the remotecontrol is not available.OKProgramme editProg. Chan. Name Lock1 :2 :3 :4 :5 :CH44CH51CH41CH47CH37ABCXYZFTP123456OffOffOffOffOffCopying programme information to a recording deviceYou can copy programme information to a compatiblerecording device connected to AV2 / AV4. See page 40 forconnection information.Press the Download (Blue) button.Programme data will now be sent to the recording device(s).This might take a few seconds, depending on the number ofstations stored. If the message “Feature not available”appears on the screen, the television is unable to send theprogramme information to the recording device(s). See thedevice’s instruction book for further information.DOWNLOAD IN PROGRESSPLEASE WAITProgramme : 63Remote control unavailableDownload(Blue)