Panasonic TX-26LX600P Operating Instructions Manual

Panasonic TX-26LX600P Operating Instructions Manual Manual pdf 17 page image

Advanced17• How to Use Menu Functions(picture, sound quality, etc.)Adjustments / Configurations (alternatives)Basic picture mode (Dynamic / Normal / Cinema / Auto)• Set for each input signal Viewing mode DynamicAdjusts colour, brightness, etc. for each picture mode to suit your tasteContrastBrightnessColourSharpnessAdjusts tint of image• For NTSC signal reception only TintChooses the colour balance of the entire image (Cool / Normal / Warm) Colour balance NormalAutomatically adjusts colours to vivid ones (Off / On) Colour management OnAutomatically reduces unwanted picture noise (Off / Normal / Dynamic / Auto)• Not valid on HDMI, PC, and Analogue component signal P-NR AutoAutomatically reduces noise for watching DTV, DVD, VCD and SD Card(Off / Min / Mid / Max) MPEG NR OffAutomatically makes still pictures and slow pictures look more vivid (Off / On)• For PAL or NTSC signal reception only• Not valid on RGB, S-Video, components, PC,HDMI and SD Card3D-COMB OnAdjusts the output level of deep bass BassAdjusts the output level of high-pitch, shrill sound TrebleAdjusts volume level of right and left speakers BalanceAdjusts the volume of the headphones Headphone volumeSelect stereo / monaural (Mono / Stereo)• Normally: Stereo• Stereo signal cannot be received: Mono• M1 / M2: Available while mono signal is transmittedMPX StereoImproves sound quality for music and dramas (Music / Speech) Mode MusicSRS TruSurround XT ® creates a high quality surround sound effect using just twospeakers from the source which can output surround encoded signals (Off / On)• Switching is also possible by SRS button on the remote controlSRS TruSurround XT OffChooses according to the signal when HDMI is connected(Auto / Digital / Analogue) (p. 33)• HDMI2 terminal is for digital signal onlyHDMI1 input AutoChooses the connector to which a Q-Link compatible equipment is connected(Off / AV2 / AV3) (p. 30) Q-Link AV2Chooses the signal to be transmitted from the TV to Q-Link(TV / AV1 / AV2 / AV3 / AV4 / Monitor)• Monitor: Image displayed on screen• Component, PC and HDMI signals cannot be outputtedAV2 out TVControl with HDMI function (Off / On) (p. 27) Control with HDMI OnTeletext display mode (FLOF / List) (p. 14) Teletext FLOFSets the time the TV automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes) Off timer OffSelects teletext language (West / East1 / East2)• West: English, French, German, Greek, Italian, Spanish, Swedish, Turkish• East1: Czech, English, Estonian, Lettish, Rumanian, Russian, Ukrainian• East2: Czech, Hungarian, Lettish, Polish, RumanianText language WestEdits channels (p. 18) Programme edit AccessSets channels automatically (p. 20) AccessAuto setupSets channels manually (p. 20) Manual tuning AccessFine tuning of channels (during rain, etc.) Fine tuningSelects optional colour system depending on video signals(Auto / PAL / SECAM / M.NTSC) Colour system AutoAdjusts volume of individual stations Volume correc.Set “On” when the decoder is connected to AV2 or AV3 terminal via a Q-Link equipment(Off / On) Decoder (AV2) OffChanges language for on-screen displays OSD language AccessSelects optional colour system based on video signals in AV mode(Auto / PAL / SECAM / M.NTSC / NTSC) Colour system AutoAdjusts volume for AV, PC, HDMI and component mode Volume correction• A different menu will be displayed while PC or SD Card is used. (p. 21 and p. 23)• In AV mode, the Sound menu and Setup menu give a smaller number of options.