Panasonic TX-26LX500P Operating Instructions Manual

Also see for TX-26LX500F: Service manual Service manual Service manual

Panasonic TX-26LX500P Operating Instructions Manual Manual pdf 28 page image

SelectSelectSD : ReturnExitViewPHOTOVIEW MODEFilename : 800-0003Date : 06/12/2003Pixel : 2048x153600001/00028OK28Card operationsPhoto viewThe still images recorded by the digital camera will be displayed.This function supports both SD cards and PC cards.Press the SD button.Move to choose Photo view.Access Photo view.The thumbnail screen is displayed.Select the file.Press the OK button to view. OKNotes:• Picture menu or Viewing setup adjustment is possible by pressing theMENU button during Photo view.• During single view and Slide show, the Aspect ratio can be changedby pressing the ASPECT button.SD cardMPEG4 viewPhoto viewSetupMemory leftDuring single viewWhen the operation guide is not displayed, press the button to display it.During the operation guide is displayedMENURedSlide showIntervalViewing setup Access5secRepeat OffCard SDInserted card displayed (this does notappear for a card which is not selected)Press to skip the previous view.Press to display the thumbnail.Press to rotate the view.Each press rotates the view ninety degrees.Press to skip the next view.Press the Red button to zoom the view.During zoom mode, you can move the position by using the cursorbuttons.Viewing setupPress the MENU button during Photo view.Move to choose Viewing setup.Access Viewing setup.Move and adjust options or access Slide show.Slide showSelect the settings of Interval and Repeat before accessing Slide show.Interval (5sec, 10sec, 15sec, 30sec, 60sec, 90sec or 120sec)Select the length of time that a slide is being displayed on screen.Repeat (On or Off)Select the repeat on or off.Card (SD or PC)Select either SD or PC when both cards are inserted in the slots.Not selected when one card is inserted.