Panasonic TX-23LX60A Operating Instructions Manual

Also see for TX-23LX60A: Service manual

Contents

Panasonic TX-23LX60A Operating Instructions Manual Manual pdf 15 page image

Advanced15• How to Use Menu Functions(picture, sound quality, etc.)• In AV mode, the Sound menu and Setup menu gives a smaller number of options.Con fi gurations (alternatives)Basic picture mode (Dynamic / Standard / Cinema / Auto)• Menu mode will be memorized for each TV, AV1, AV2, HDMI1 and HDMI2 mode.• B.A.T.S. (p. 7) is in effect when Menu mode is set to Auto.Menu DynamicAdjusts colour, brightness, etc. for each picture mode to suit your tasteContrastBrightnessColourSharpnessAdjusts tint of image• For NTSC signal reception only• Item will be changed to "Tint" when receiving YUV (60Hz) or HDMI (60Hz) signalNTSC-Tintture Chooses the colour balance of the entire image (Cool / Standard / Warm) Colour temperature StandardAutomatically reduces image noise (Off / Strong / Weak / Auto)• Set to Off when receiving a strong signal or AV Input. D. PNR AutoBasic sound mode (Music / News / Cinema)• Menu mode will be memorized for each TV, AV1, AV2, HDMI1 and HDMI2 mode. Menu MusicAdjusts the output volume VolumeAdjusts the output level of deep bass, high-pitch, shrill sound for each sound mode BassTrebleAdjusts volume level of right and left speakers BalanceAdjusts the volume of the headphones Headphone volumeGives a greater spatial effect by using dynamic enhancer (Off / On)• Switching is also possible by SURROUND button on the remote control Surround OffChooses according to the signal when HDMI is connected(Auto / Digital / Analogue) (p. 25)• HDMI2 terminal is for digital signal onlyHDMI1 input AutoControl with HDMI function (On / Off) (p. 20) Control with HDMI OnTeletext display mode (TOP / List) (p. 12) Teletext TOPSets the time the unit automatically turns Off. (Off / 15 / 30 / 45 / 60 / 75 / 90) (minutes)Switching is also possible by pressing the Off timer button. (p. 7) Off timer OffColour density varying between broadcast channels can be adjusted to three levels foreach reception channel• Select the channel you want to adjust and set this functionCh colour setChild lock can be set for each channel and each AV modeImage and sound are not available during Child lock On (Black screen will appear)• Select the channel or AV mode you want to lock and set this functionChild lock OffBlue background display (Off / On)• On: Display blue background when there are no signals• Off: Do not display blue backgroundBlue back OffEdits or sets channels (p. 16) Tuning menu AccessDisplayed during AV mode. If a clear picture with current colours cannot be obtainedwhen a Broadcast or AV signal is received, this function is used.Auto / PAL / SECAM / NTSC 4.43 / NTSC 3.58PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission sys-tems applicable to differing countries. NTSC 4.43 is a trick playback mode used in spe-cial VCR’s to playback NTSC recorded video tapes through PAL television equipment.Colour system AutoDisplayed during AV modeAvailable only with 480p or 576p input signals in a natural colour from digital equipmentconnected to AV2 Component terminalsSelect SD or HD to adjust suitable colour parameters for SD (standard definition) or HD(high definition)• SD: Input signal is a normal TV system• HD: Input signal is a High-Definition systemColour matrix SD