Panasonic TX-23LX50A Operating Instructions Manual

Also see for TX-23LX50A: Service manual

Panasonic TX-23LX50A Operating Instructions Manual Manual pdf 10 page image

10Return ExitChangeSelectMenuVolumeBassTrebleBalanceSurroundSound menuOffMusicOKMENU1 2 34 67 8 90TVOK5TV/AVPower On / OffMany features available on this TV can be accessed via the On Screen Display menu system. Use the remotecontrol as shown below to access and adjust features as desired.The MENU button is used to open the main menus andalso to return to the previous menu.The up and down cursor buttons are used to move thecursor and select menus.The left and right cursor buttons are used to access menus,adjust levels or to select from a range of options.The OK button is used with a number of features to storesettings after adjustments have been made or options havebeen set.The TV/AV button is used to exit the menu system andreturn to the normal viewing screen.An On Screen Help box is displayed whenever a menu isdisplayed on the TV. This Help box indicates which buttons onthe remote control are used to navigate the menu shown, seeabove for descriptions of button functions.ON SCREEN HELP‘Instructions’ boxNote:The Help box is not shown in the menu pictures in thisinstruction book due to space limitations.Using the On Screen DisplaysConnect the mains plug to the wall socket.Press the [ ] switch on the TV set to turn theset on.To switch the TV set to Standby mode, press thebutton on the remote control.The TV set can be switched on by pressing thebutton again if it was in Standby mode.Note:If the set is not switched off when the TV stationstops transmitting, it will automatically go toStandby mode after 30 minutes. This functionwill not operate when the TV is in AV mode.1 2 34 67 8 90TVOK5Power IndicatorRemote control signal sensorStandby : RedOn : No LightC.A.T.S. sensorLCD C.A.T.S. (Contrast Automatic TrackingSystem) automatically senses the ambientlight conditions and adjusts the brightness andgradation accordingly, to optimize contrast.C.A.T.S. is in effect when Menu mode (page14) is set to Auto.Main POWERswitch