Identifying ControlsTVPC terminalAV4 terminalsHeadphonejackHDMI3terminalSD card slotPower LEDStandby: redzOn: greenWhen using the remote control, indicates the TV haszreceived a command.C.A.T.S. (Contrast Automatic Tracking System) sensorSenses brightness to adjust picture quality when “Eco Mode” inzthe Picture Menu is set to “On” (p. 22)Remote control signal receiverDo not place any objects between the TV remote control signalzreceiver and remote control.Function SelectVolume / Contrast / Brightness / Colour /zSharpness / Tint (NTSC mode) / Bass /Treble / Balance / Auto Tuning (p. 22 - 23)Change the channel up/down. When afunction is displayed, press up/down toadjust the setting of the selected function.When in standby mode, switches TV on.Change the input modeMains power On / Off switchSwitch On to turn on the TVzMaintenanceFirst, remove the mains plug from the socket outlet.Display PanelRegular care: Gently wipe the surface clean of dirt by using a soft cloth.Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral detergent(1 part detergent to 100 parts water). Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.CautionDo not tap or scratch the surface with your fingernail or other hard object.zTake care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances.zThis may degrade surface quality.Cabinet, PedestalRegular care: Wipe the surface clean using a soft dry cloth.Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.CautionTake care not to subject the TV’s surfaces to detergent. A liquid inside the TV could lead to product failure.zTake care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances.zThis may deteriorate the surface by peeling the paint.Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time.zMains plugWipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fire or electrical shock.)8