Panasonic TH-P42X10D Operating Instructions Manual

Panasonic TH-P42X10D Operating Instructions Manual Manual pdf 22 page image

How to Use Menu FunctionsMenu ListMenu Item Adjustments / Configurations (alternatives)PictureViewing ModeBasic picture mode (Dynamic / Normal / Cinema / Game)Dynamic : Provides enhanced picture contrast and sharpness when viewing in a bright roomNormal : Recommended for viewing under normal ambient room lighting conditionsCinema : For watching movies in a darkened room producing a cinema-like pictureGame : Game playing time is displayed only when connecting a game equipmentSet for each input signalzContrast, Brightness,Colour, Sharpness Increases or decreases the levels of these options according to your personal preferenceTint With an NTSC signal source connected to the TV, the picture hue can be adjusted to suityour tasteFor NTSC or Component / HDMI input signal reception onlyzColour Balance Allows you to set the overall colour tone of the picture (Cool / Normal / Warm)Channel Colour Set Colour density varying between broadcast channels can be adjusted to three levelsfor each reception channelSelect the channel you want to adjust and set this functionzColour Management Automatically adjusts colours to vivid ones (Off / On)Not valid on PC signalzx.v.Colour Increases the colour gradations (Off / Auto)This is effective when watching HD moving pictures from an external equipment or an SD card.For HDMI or “Movie View” mode (p. 34) onlyzEco Mode Adjusts picture settings automatically dependent on ambient lighting conditions (Off / On)P-NRPicture Noise ReductionAutomatically reduces unwanted picture noise and flicker noise in the contoured parts of apicture (Off / Min / Mid / Max)Not valid on PC signalz3D-COMBOccasionally, whilst viewing still or slow moving pictures, colour patterning may be seenSet to “On” to display sharper and more accurate colours (Off / On)For PAL or NTSC signal reception onlyzNot valid on S-Video, Component, PC, HDMI and SD CardzReset to Defaults Press the OK button to reset the present Picture Menu to the default settingsSoundMode Basic sound mode (Music / Speech)Set for each input signalzBass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound outputBalance Adjusts volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings (Off / V-Audio / V-Audio Surround)V-Audio: Provides a dynamic enhancer to simulate improved spatial effectsV-Audio Surround: Provides a dynamic enhancer of width and depth to simulate improvedspatial effectsSwitching is also possible by the Surround button on the remote control (p. 9).zVolume Correction Adjusts volume of individual channel or input modeSpeaker Distanceto WallAdjusts the low frequency sound (Over 30cm / Up to 30cm)Over 30cm: Recommended when the back space between the TV and wall is over 30 cm.zUp to 30cm: Recommended when the back space between the TV and wall is within 30 cm.zMPXSelects stereo / monaural (Stereo / Mono) (p. 43)Normally: StereozStereo signal cannot be received: MonozM1 / M2: Available while mono signal is transmittedzHDMI1 / 3 InputSelect to fit the input signal (Digital / Analogue) (p. 43)Digital: HDMI cable connectionAnalogue: HDMI-DVI adapter cable connectionHDMI input mode onlyzHDMI2 terminal is for digital signal onlyzNo setting for HDMI2 availablezReset to Defaults Press the OK button to reset the present Sound Menu to the default settings22