14EXITASPECTHOLDMENUOPTIONPOWERRECALLTVOFF TIMERINPUTWatching TVTurn power onPOWER Mains power On / Off switch should be On. (p. 8)zSelect a channelupdown orTo select the two or three-digit channelznumber, e.g. 39¨ 3 ¨ 9 (in a short time)If one or two-digit channel numberz¨ ¨ quickly changes the channel1Other useful functionsHoldHOLD Freeze / unfreeze pictureDisplay Information bannerRECALLDisplay Information bannerAlso appears when changing channelszTV1 BBCCH025.5MHzPAL16:9TV1 BBCCH025.5MHzPAL16:9Sound carrierColour system *Channel position / nameInput modeChannel numberSound mute On, , ,Audio mode (p.43) 1 - 90Off Timer remaining timeFor settingsz ¨ p.15Teletext(varies depending on the broadcasters)Teletext service availableAspect ratioTo set display timeoutz“Banner Display Timeout” (p. 23)¨To hidez ¨EXIT* Colour system is displayed only when it is setto other than “Auto”.“Colour System” in “Manual Tuning”¨ (p. 27)“AV Colour System” in Setup Menu¨ (p. 23)Select TV modeTV Also possible to select the mode using the TV button on thezside panel of the TV. (p. 8)TV1 BBCCH025.5MHzPAL16:9 Information bannerappears whenever youselect a channelFor detailsz ¨ below23NoteWhen the TV is switched to standby, there will be a clicking sound after a short delay.zThis is normal.