217.11. Remove the SC-Board1. Remove the SU-Board and SD-Board. (See section 7.9.and 7.10.)2. Unlock the cable clampers to free the cable.3. Disconnect the connector (SC2).4. Disconnect the flexible cable (SC20).5. Remove the screws (×6 ) and remove the SC-Board.7.12. Remove the SS2-Board1. Remove the Tuner unit. (See section 7.4.)2. Disconnect the bridge connector (SS21-SS24) and dis-connect the flexible cable (SS58).3. Remove the screws (×2 ) and remove the SS2-Board.7.13. Remove the SS-Board1. Remove the Tuner unit. (See section 7.4.)2. Unlock the cable clampers to free the cable.3. Disconnect the connectors (SS11 and SS33).4. Disconnect the flexible cables (SS61 and SS64).5. Disconnect the bridge connector (SS21-SS24).6. Remove the screws (×6 ) and remove the SS-Board.7.14. Remove the Hanger metals andthe Stand brackets1. Remove the Plasma panel section from the servicingstand and lay on a flat surface such as a table (coveredby a soft cloth) with the Plasma panel surface facingdownward.2. Remove the Hanger metals (L, R) fastening screws (×4each) and remove the Hanger metals (L, R).3. Remove the Stand brackets (L, R) fastening screws (×4each) and remove the Stand bracket metals (L, R)and the Stand brackets (L, R).
