- 62 -3D Eyewear - Functions■ Part names and functionsPower button / Mode change / Indicator lamp● Power button– Press and hold for approx. 1 second to turn the 3D Eyewear on.(The indicator lamp lights for 2 seconds.)– Press and hold for 3 seconds or more to turn the 3D Eyewear off.(The indicator lamp lights 3 times.)● Mode change– Press and hold for approx. 1 second to change the mode between3D and 2D (view a 3D image in 2D).– When power is off, press and hold for approx. 5 seconds to changeto registration mode.Watching > 3D > 3D Eyewear - Registration● Indicator lamp– Lights or flashes during use to show the status (see below).Protection film– Peel off the protection film on both side of the lens.Insulating sheet– When using for the first time, remove the insulating sheet. Pull theinsulating sheet.Battery cover– To replace the batteryWatching > 3D > 3D Eyewear - Replacing battery
