Panasonic TH-85PF12W Operating Instructions Manual

Also see for TH-85PF12U: Specifications Installation manual Operating instructions Service manual Operating instructions

Contents

Panasonic TH-85PF12W Operating Instructions Manual Manual pdf 47 page image

—MULTI PIPDISPLAY MODEBLEND PIPOFF1INSERT LEVELTRANSPARENCYINSERT0 %TRANSPARENCY LEVELOFFMULTI PIP SETUP2/2SET UPMULTI DISPLAY SETUPSET UP TIMERMULTI PIP SETUPPORTRAIT SETUP47MULTI PIP SETUPSet the two-screen display function that is activated when is pressed.Press to select the MULTI PIP SETUP.Press to display the “MULTI PIP SETUP” menu.Press to display the SET UP menu.123 Press to select the menu to adjust.Press to adjust the menu.Sub Screen Insertion (During BLEND PIP)1 Select “ON” in “INSERT”.2 Set the “INSERT LEVEL”. (1 to 10 %)Set the brightness level threshold for discriminating between the transparent areas and non-transparent areas on the sub screen.Setting example Image to insert (sub screen) INSERT LEVELBackground image(main screen) Two-picture insertionOnly the areas on the overlayimage that are brighter thanthe “INSERT LEVEL” aredisplayed on the backgroundimage.10 %1 %Note: “TRANSPARENCY” cannot be set when “INSERT” is “ON”.Transparent Display of the Sub Screen (During BLEND PIP)1 Select “ON” in “TRANSPARENCY”.2 Set the transparency level for the sub screen in “TRANSPARENCY LEVEL”. (0 to 100 %)Setting example Transparent image (sub screen)0 %: No transparency 100 %: Fully transparentNote: “INSERT” cannot be set when “TRANSPARENCY” is “ON”.MULTI PIPSet the two-screen function.PIP ADVANCED PIPBLEND PIPDISPLAY MODEThe display mode can be changed separately for each function that was set in “MULTI PIP SETUP”.For “PIP”: — (One screen) P AND P P OUT P P IN PFor “ADVANCED PIP”: — (One screen) 1 to 8For “BLEND PIP”: — (One screen) FULL P IN PNote: The display mode changes in the same way when is pressed.