40Reduces screen image retentionEXPRESS SETTINGSSet the “Image Retention Reduction” menu to the recommended settings.All menus will be locked.PICTURE MENU: STANDARDPICTURE: 10SIDE BAR ADJUST: BRIGHTNANODRIFT SAVER: HIGH MIDPEAK LIMIT: ON1 Select “EXPRESS SETTINGS”.EXPRESS SETTINGSCUSTOM SETTINGSRESETEXTENDED LIFE SETTINGS 1 select2 access2 Select the input to apply the settings.APPLY TO CURRENT INPUTAPPLY TO ALL INPUTSEXTENDED LIFE SETTINGS 1 select2 setPEAK LIMITON: Suppresses image contrast (peak brightness).Note: When a still picture is viewed for an extended time, the screen may become slightly darker. (see page 60)NANODRIFT SAVERMoves the display position of the screen slightly to reduce image retention on the display panel.OFF: NANODRIFT SAVER does not operate.MIN–MAX: NANODRIFT SAVER operates. The display position of the screen moves at set time intervals. You can setthe screen movement range. Some of the screen may appear to be missing as a result of this operation.If you change the value, a mask is displayed in the range where the picture is missing as a result of positionmovement.If this is set to other than “OFF”, “NANODRIFT” is displayed below the aspectmode display.Note:This function does not work in the following cases.When “MULTI DISPLAY SETUP” is set to “ON”When “PORTRAIT SETUP” is set to “ON”When in digital zoom modePCFULLNANODRIFT3 Select “YES”.APPLY TO CURRENT INPUTNOYESEXTENDED LIFE SETTINGS 1 select2 setEXTENDED LIFE SETTINGS when prole is lockedIf prole is locked with “Memory lock” of the Options menu, the operations of this settings menu are restrictedas shown below. “Locking proles” page 33EXPRESS SETTINGS: Cannot be set.CUSTOM SETTINGS: “PICTURE MENU,” “PICTURE,” and “LOCK SETTINGS” cannot be set.RESET: “PICTURE MENU” and “PICTURE” are not reset.