Panasonic TH-85PF12U Operating Instructions Manual

Also see for TH-85PF12U: Specifications Installation manual Operating instructions Operating instructions Service manual

Contents

Panasonic TH-85PF12U Operating Instructions Manual Manual pdf 25 page image

0NORMALNORMALIZEAUTO SETUPPOS. /SIZEV-POS0H-POSV-SIZEDOT CLOCKH-SIZECLOCK PHASE1:1 PIXEL MODE OFF0000000NORMALNORMALIZEPOS. /SIZEV-POSH-POS0V-SIZEH-SIZE1:1 PIXEL MODE OFFAUTO SETUP25Adjusting POS. /SIZE1 Press to display the POS. /SIZE menu.Press to select the menu to adjust.Press to adjust the menu.Press to exit from adjust mode.During “VIDEO (S VIDEO)”, “Digital”,“SDI” and “HDMI” input signal.During “COMPONENT”, “RGB”and “PC” input signal.Notes:• Unadjustable items are grayed out.Adjustable items differ depending on the input signal and the display mode.• Adjustment details are memorized separately for different input signal formats.(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i ·50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals arememorized for each frequency.)• If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This pictureposition movement cannot be controlled by the POS. /SIZE function.• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. Whenexiting the mode, the screen will return to a former adjustment.234AUTOSETUPH-POS/V-POS, H-SIZE/V-SIZE, DOT CLOCK and CLOCK PHASE are automatically adjusted when theRGB or PC signal is received.This setting is enabled under the following conditions:• This setting only support single screen display. Two screen display or multiple display are not supported.• When “COMPONENT/RGB-IN SELECT” or “YUV/RGB-IN SELECT” in the “SET UP” menu (see page 52)is set to “RGB”, this setting is enabled.• When the signal is not PC format, this setting is enabled only if “OVER SCAN” (see page 26) is “OFF” or“1:1 PIXEL MODE” (see page 27) is “ON”, and H-SIZE/V-SIZE is not automatically adjusted.This setting will be invalid and will not work under the following conditions:• Aspect is set to “JUST”• “Display size” in the Options menu (see page 56) is set to “On”Using Remote ControlNote:To operate this function, please purchase remote controller sold separately.Object model : N2QAYB000432When on the remote control is pressed, “AUTO SETUP” will be executed.When AUTO SETUP does not work, “INVALID” is displayed.Auto modeWhen the “Auto Setup“ is set to “Auto” in the Options menu (see page 57), automatic position adjustment starts :• When the display power is turned ON.• When the input signal is switched.