Panasonic TH-80LFB70U Operating Instructions Manual

Also see for TH-80LFB70E: Operating instructions Operating instructions Operating instructions Service manual

Contents

Panasonic TH-80LFB70U Operating Instructions Manual Manual pdf 15 page image

15INPUTMENUVOLENTER/+ /- /Basic ControlsMENU Screen ON / OFFEach time the MENU button is pressed, the menu screen will switch.Normal Viewing PictureSound Pos. /Size SetupVolume AdjustmentVolume Up “+” Down “–”When the menu screen is displayed:“+”: press to move the cursor up“–” : press to move the cursor downRemote controlsensorMain Power On / Off SwitchBrightness SensorDetects the brightness in the viewing environment.Main Unit Power IndicatorThe Power Indicator will light.• Power-OFF .... Indicator not illuminated (The unit will stillconsume some power as long as the powercord is still inserted into the wall outlet.)• Standby ........ RedOrange (When “Slot power” is set to “On”and Terminal Board is installed.)Orange (Depending on the type of the function boardinstalled, when the power is supplied to the slot)Orange (When “Control I/F Select” is set to “DIGITALLINK/LAN” or “Wireless Network Standby” is set to “On”.Refer to “Operating Instructions, Network Operations”)Orange (When “Quick Launch” is set to “On”.)• Power-ON ...... Green• HDMI1 Power managementHDMI2 Power management......................... Orange (With HDMI1 or HDMI2 input signal.)• PC Power management (DPMS)......................... Orange (With PC input signal.)• DVI-D Power management......................... Orange (With DVI input signal.)Note:If the power indicator is orange, power consumption duringstandby is generally larger than that of when the powerindicator is red.Enter / Aspect buttonINPUT button (INPUT signal selection)SLOT: Terminal board (optional accessories) insertslot (see page 5 )Note:The upper side slot is for terminal board with 2-slotwidth. The terminal board with 1-slot width does notfunction when installed in the upper side slot.Touch panel IR transmission partInstalled on the four sides of the display panel.USB A (VIEWER): Connect to USB memory.USB B (TOUCH): When using the “WhiteBoardSoftware” from the supplied CD-ROM, connect the computer viaUSB cable.