|
English18Basic ControlsRemote Control Sensor /Power Indicator ) (Unit)>(Back of the unit)AC socket outlet86-inch model75-inch modelAC cord(supplied)65-inch model55-inch model50-inch model43-inch model86-inch model75-inch model65-inch model55-inch model50-inch model43-inch modelOperate pointing the remote control directly at the unit’sRemote Control Sensor.Note● Do not put an obstacle between the remote controlsensor of the main unit and the remote control.● Operate the remote control in front of the remotecontrol sensor or from the area where the sensor canbe seen.● When directly aiming the remote control at the remotecontrol sensor of the main unit, the distance fromthe front of remote control sensor should be approx.7 m or less. Depending on the angle, the operationdistance may be shorter.● Do not subject the remote control sensor of the mainunit to the direct sunlight or strong fluorescent light.1 Connect the AC cord plug to thedisplay.(see page 11)2 Connect the plug to the socket outlet.Note● When disconnecting the AC cord, be absolutelysure to disconnect the AC cord plug at thesocket outlet first.● The settings may not be saved if the power plugis disconnected immediately after changingsettings with on-screen menu. Disconnect thepower plug after a enough period of time. Or,disconnect the power plug after turning thepower off with the remote control, RS-232Ccontrol or LAN control.3 Press the )> on theunit to turn the power of the unit on.● Power Indicator: Green (Picture is displayed.)● When the power of the unit is on, the powerindicator lights up and remote control operation ispossible.● When the power indicator is lit, it is not necessaryto press the ) (Unit)> on theunit. Operate the remote control so that the powerindicator turns green (picture is displayed).
|
